Temperature Gauge V3 6

• Temperature Gauge V3 6.5
• Temperature Gauge V3 600

Rediscover Ashcroft. The leading pressure and temperature instrumentation manufacturer of pressure gauges, test gauges, and temperature gauges. AutoMeter AutoMeter 2 1/16in 100-260 Degree Elite Water Temperature Gauge. You have 0 Items In Your Cart. CART TOTAL: $ 0 00. VIEW CART AND CHECKOUT.

Note: All Temperature sensors are designed to work with VDO gauges only. Sensors are matched to gauges according to maximum reading on dial face. All sensors are standard ground (sensor case to common ground). Please note: VDO sensors have tapered threads and DO NOT require the use of Teflon tape or pipe sealant. Manufacturers of electrical and electronic gauges. Contains profile, client listings and product portfolio. There are a several checks you can perform to verify the gauges in your instrument cluster are working correctly. These can be helpful if you're trying to de.

Faria Gauge Sets

Features:
• Side lit dial face
• Digital hour meter

Includes: 10-60 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Requires Faria instrument harness for installation, Part No. 32103-ZW7-000AH.

Connects Faria 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Includes: Pressure tubing.

Includes: Digital hour meter.

Includes: Removable black square bezel.

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8' hose barb (BSPT), PN 19271-ZV5-000AH, is included.

Includes: 10-60 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Features:
• Side lit dial face
• Digital hour meterRequires Faria instrument harness for installation, Part No. 32103-ZW7-000AH.

Connects Faria 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Intended for pontoon applications.

Includes: Pressure tubing.

Includes: Removable black square bezel.

Includes: Digital hour meter.

Note: Same as 37250-ZW5-010ZA only with no hour meter.

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8' hose barb (BSPT), PN19271-ZV5-000AH, is included.

Honda NMEA 2000 Gauges

The Honda NMEA 2000® tachometer and speedometer gauges display engine and vessel data received from up to five engines on the same NMEA 2000 backbone or bus. These gauges feature analog pointers for engine RPM and vessel speed as well as a two-color graphic LCD display, programmable in English or Metric units, with push-button operations for custom display set-up. The gauges are completely sealed and feature anti-fog coated lenses.
These gauges can be used as a pair or separately and connect directly to a NMEA 2000 backbone or bus. Display data includes: Engine RPM, Coolant temperature, fuel rate, fuel used, fuel level, trim, battery voltage, engine hours, and vessel speed*.* Requires NMEA 2000 GPS input to backbone.
Use of these gauges and gauge harness requires that the vessel have:
1. A properly installed and powered NMEA 2000 backbone (bus)
2. Installation of an NMEA 2000 Signal Cable from the NMEA compatible Honda Marine engine to the NMEA 2000 backbone.
• 9.8 ft. long NMEA 2000 Signal Cable, P/N 06328-ZZ3-730HE or
• 19.5 ft. long NMEA 2000 Signal Cable, P/N 06328-ZZ3-760HE
See NMEA Components for additional information and applicable model listing.

Includes Tachometer (7000 rpm), drop cable harness and T connector to connect to NMEA 2000 backbone.

Includes Tachometer (7000 rpm), Speedometer (70 mph), two drop cable harnesses and two T connectors to connect to NMEA 2000 backbone.

Includes Speedometer (70 mph), drop cable harness and T connector to connect to NMEA 2000 backbone.

Matches the styling of other NMEA 2000 gauges. The kit comes with the water pressure gauge, mounting bracket, rubber hose, hardware, and installation instructions. Gauge is available in black or white.

This NMEA harness is used to connect the Honda NMEA compatible gauge to the vessel backbone or bus. The harness is 19.5 ft. long.

Individual Gauges

Enables the rudder indicator gauge function.

Connects any speedometer to the pitot tube on the engine gearcase, transom mounted pitot tube or pitot tube connection at the front grommet. Heavy wall construction.

Does not work on BF115-250.

Macbooster 3 0 4 download free. Resettable.Note: Does not work with BF25- 50A4 tiller handle models.

Allows mounting the standard Honda original equipment tachometer, key switch, trim meter and instrument light switch.
Note: Requires standard wire harness A for connection. Intended for LHTA models.

Black face, flat lens tach. Tachometer only - no hour meter.

Kit includes Faria tach/hour meter, trim meter and Faria connecting instrument harness. Only available in black face, flat lens.

This brass fitting screws into the port (remove plug first) on the powerhead for water pressure source. This is a British Pipe Thread which conforms to the factory thread on the designated engines. Always use 2 wire ties to secure tubing to this fitting.

Low water Intake Screen set used on standard and Sabre™ gear cases. Uses original equipment mounting hardware. Allows the outboard to be run at a higher position while minimizing the top of the exposed screen from drawing air into the cooling system.

Uses original equipment mountinghardware. Allows the outboard to berun at a higher position without drawingair into the cooling system through thetop of the exposed screen.

Temperature Gauge V3 6.5

May be needed to install the smaller diameter original equipment tachometer in the standard 3 3⁄8 inch hole. Kit contains two black anodized aluminum bezel rings, needed for front and rear of mounting panel.

Connects original equipment tachometer, trim meter, and harness ‘‘B'' tomain harness or side mount control box. 54 inches long.

Provides additional connection to harness ‘‘A'' for speedometer, hour meter and volt meter.

Matches the face plate of the Honda digital speedometer and digital tachometer. Includes pressure tubing and engine fitting. Requires additional 1/8' hose barb (BSPT), PN 19271-ZV5-000AH.

10 foot long extension harness connects the 6 pin connector on the 20 or 23 wire engine main harness at the helm to the digital gauge harness. Allows digital gauges to be mounted in a remote location.

Connects to 7-wire key switch panel harness. Supports both digital tach and speed as well as analog gauges.
Both analog and digital gauges can be used separately or in combination with each other. This harness will allow digital gauges to show analog functions on non-digital engines (same as standard 5 gauge set as well as PGMFI indicator lights). Standard analog gauge harness plugs into separate 4-wire pigtail provided.

VeeThree Gauge Sets

Features:
• Fog free lens coating
• Back lit dial face
• Digital hour meter
• Engine on Demand Technology only logs hours on hour meter when engine is running

Includes: 10-65 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.
Requires Teleflex instrument harness for installation, Part No. 32200-ZW7-000AH.

Connects Teleflex 5 gauge set plus optional water pressure gauge to main harness. 54 inches long.

Intended for pontoon applications. Includes: Pressure tubing.

Includes: Pressure tubing.

Includes: Pressure tubing.

Includes: Digital hour meter.

Temperature Gauge V3 600

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8' hose barb (BSPT), PN 19271-ZV5-000AH, is included.

Includes: 10-65 mph speedometer, 7K tach/hour meter, trim meter, volt meter, fuel gauge.Requires Teleflex instrument harness for installation, Part No. 32200-ZW7-000AH.

Connects Teleflex 5 gauge set plus optional water pressure gauge to main harness. Volvo penta tamd41 manual. 54 inches long.

Intended for pontoon applications. Includes: Pressure tubing.

Distance terminal 1 and 2 frankfurt. Includes: Pressure tubing.

Includes: Pressure tubing.

Includes: Digital hour meter.

Matches 5 gauge set dial face. Includes: Pressure tubing and fitting. Required 1/8' hose barb (BSPT), PN 19271-ZV5-000AH, is included.